Control and power
Control is by digital DMX 512 or analogue 0 to 10V via the DIN connector. The dimmer is also equipped with a potentiometer on the front panel for local control. Setting the DMX address is made with a thumb-wheel switch on the front.
Power input is via a CEE 32 connector on the side of the dimmer.
There are three LEDs for indication of phases: L1, L2, L3.
DMX signal IN is indicated by the LED next to the thumb-wheel switch.
If the DMX input signal is interrupted, the dimmer will keep the last DMX value.
When there is a combination of DMX- and analogue control signals, the highest value takes precedence.